Helpful hints before you get started

• Use a lighted, magnified mirror.
• Keep a box of tissues or cotton swabs handy.
• Place an old towel or newspaper on work area to prevent staining.

Perform an allergy test for 48 hours before applying.

Squeeze a small amount of Solution No.1 onto the end of the application stick and apply to the inside of your arm. Do the same with Solution No.2 and apply directly on top of solution No.1. Let stand 2 minutes and wipe clean. Close and secure packets with paper clip and place back in zip lock bag. Wait 48 hours. If no visible signs of irritation occur, proceed with tinting the eyebrows. Do not use this product if irritation is visible.

Tinting the Eyebrows

Preparing the brows

1. Very Important. For best results, wash eyebrows with a mild soap and water, or use an oil free makeup remover. Let dry before tinting.
2. To protect the skin from accidental staining, apply a thin coat of petroleum jelly around the eyebrow. Be careful not to get any on the eyebrows, this could inhibit coloring process.

Application

1. Remove work station card and squeeze entire contents of Solution No 1 and No 2 onto the marked circles. Do not mix.
2. It is best to tint one eyebrow at a time, allowing the color to process completely before starting the second eyebrow. Using enclosed applicator stick, apply solution No 1 onto the eyebrow. Let stand for 2 minutes. Gently blot dry with a tissue before proceeding to the next step.
3. Wipe applicator stick clean and apply Solution No 2 directly to the eyebrow. Let stand one minute and wipe clean with a damp tissue or cotton ball. Remove any color that may have gotten onto the skin with a damp tissue.

Helpful hint. For slightly darker, longer lasting results, reapply remaining mixture and repeat the process.